Crusher, PBEW
Crushing of bulky materials.
The ORIGINAL PALLMANN Horizontal Knife Mill, type PSRH, called ,Biber“, with an hydraulic feed system is best suited for the size reduction of most various types of plastic waste. The Horizontal Knife Mill will scredd such as purgings, waste from the production of pipe-, profile and film, pressed bales of plastic bottles, film-, fiber and carpet waste and many
The Horizontal Knife Mill is usually installed on the production floor or in a pit. Typical feeding method is by hand, with a belt conveyor, a forklift, a crane or other mechanical devices into the feed hopper.
The feed material is automatically fed into the rotor by means of a hydraulic, intermittently moved live bottom. The material is size reduced between the rotor- and stator knives. A screen keeps the material in the grinding chamber until the desired final size is achieved. The finished product is discharged straight down and is transported further either pneumatically or mechanically, depending on the material condition or the downstream processing step.
Advantages & Features
- Slow speed rotor, extremely quiet operation and low dust generation
- Different crushing teeth patterns on the rotor adapted to material and requested degree of preparation
- Easy feeding due to oversized storage bin
- Simple re-armoring of the crushing teeth
- Lateral material discharge; no expensive foundations are required
- Trouble free operation – no bridging of material due to special devices installed on the storage bin
- Sturdy rotor and drive make the machine resistant to foreign matter
- Throughput capacity increase for downstream size reduction equipment due to reduced volume of feed material and consequently easier metering
- After pre-crushing, large ferric contamination can be easily separated
- Special designs available for preparing piles of particle (MDF) board
- Final particle size of pre-crushed material can be determined by different available machine configurations
- Chemicals
- Plastics
- Wood
- Recycling
| Type | PSRH | 6-9 | 6-12 | 12-8 | 16-12 | 22-18 |
|---|---|---|---|---|---|---|
| Feed Hopper Opening | mm | 2000×730 | 2000×1150 | 4000×1050 | 4000×920 | 3500×1600 |
| Rotor Diameter | mm | 600 | 600 | 1200 | 1600 | 2200 |
| Rotor Length | mm | 900 | 1200 | 800 | 1200 | 1800 |
| Motor | kW | 75 | 110 | 160 | 200 | 540 |
| Throughput Rate* | kg/h | 500-2000 | 650-2600 | 1000-4000 | 1750-7000 | 3000-1200 |
| Weight | kg | 8300 | 10300 | 18300 | 29200 | 85000 |
| Machine Dimensions ( LWH ) | mm | 5670x3720x3640 | 6140x4030x3640 | 10695x3100x2755 | 12000x4830x4000 | 16340x6500x5240 |
