| Applications Chemical, Pharmaceutical, and feedstuff industry. Disaggregating, preparing, coarse, medium fine, fine, and very fine grinding. All soft to medium hard materials (hardness 4 Mohs) for dry, moist or wet grinding, even of fatty adhesive materials. Method of Operation A vibratory feeder equally feeds the material into the mill. The maximum feed size is approximately 7 mm. The Universal Mill can be equipped with a wide selection of interchangeable grinding components. The pulverized material is discharged out of the mill straight down into a collecting chute and is filled into a material collecting bin. The air sucked in by the mill is cleaned in a filter. The filter can be removed vertically. | Special Features Highest Flexibility through interchangeable grinding components (beater cams, turbo impeller, pin discs, cone impeller, double stream impeller, wing impeller, grinding track, screen ring, conical baffle plate (in REF design) Easy access for cleaning and exchanging of the grinding components Machine housing in welded design Bearing assembly flanged to the rear wall of the housing Special designs available, such as All parts in contact with product made of stainless steel Polished surfaces Explosion pressure resistant up to 10 bar Bearing seals gas flushed Designed for operation under inert atmosphere and cryogenic grinding
|
