Pulverizing Systems for
the Rubber Industry
Production of rubber
powders in a wide variety of particle sizes
For the production of
compounds for cable manufacturing, seals and other
elastic parts as well as for bitumen and asphalt
production, rubber powders in a wide variety of particle
sizes are required. PALLMANN offers various
grinding machines and systems in order to achieve the
necessary material qualities and end finenesses.
Disc mills,
type PKM and Turbo Mills
, type PP are used.
Turbofiners®,
type PLM and
Pin Mills, type PPST
are used for special applications.
Method of Operation
Granule shaped feed
material is fed into the mill by means of
suitable metering systems. A vacuum
system, optimally suited for this application,
draws the material to be ground away from the
mill. Different types of screening systems
are used to achieve the desired powder
qualities.
Screened coarse
material is reintroduced into the mill in a
closed loop, finished product is weighed into
bags, in accordance with the customers'
requirements, filled into containers or directly
transported into the production process.
Standard systems for
installation on the production floor are
available. Individual set-up even in
multi-level buildings is possible, depending on
the local conditions.
 |
 |
Systems and
Machine Photo Gallery
Pulverizing System, type PKM Pulverizing System, type PLM Pulverizing System, type PPST
Pulverizing System, type PKM
|
Technical Specifications
|
Type |
|
PP4S |
PP6S |
PP8S |
PKM300 |
PKM450 |
PKM600 |
PKM800 |
|
Grinding Diameter |
mm |
400 |
600 |
800 |
300 |
450 |
600 |
800 |
|
Motor |
kW |
7.5+15 |
11+3 |
18.5+45 |
32-37 |
45-55 |
55-75 |
90-160 |
|
Throughput rate * |
kW |
20-100 |
90-200 |
180-360 |
30-180 |
120-300 |
250-300 |
400-800 |
* Throughput Rate
may vary depending of the feed material |
|
 |
