


	PS Series 300 PS Series 400 PS Series 600 PS Series 800-1200 PS Series B PS Series C PS Series F PS Series H PS Series I PS Series K PS Series L PS Series P PS Series R PS Series S PS Series T PS Series U PS Series V PS Series W Series PSRH Series PSC

Knife Mill, Type PS-V

Recycling of all types of injection molded, blow molded and extruded parts. Plastic parts with thin or thick walls can be granulated, as well as purgings, lumps, profile and pipe waste etc.

Method of Operation

Installation of the granulator is direct on the production floor or in a pit. Feeding is done manually or with a belt conveyor. Material is size reduced between rotor- and bed knives. A screen holds material inside the grinding chamber, as long as it is too coarse. Fine material is discharged through the screen into a suction pan, which can be connected up to a pneumatic conveying system.

A V-shaped rotor, equipped with high quality rotor knives pulls the material into the center of the cutting chamber, thus friction on the side walls of the cutting chamber is reduced. The number of rotor knives used (3, 5, or 7) depends on the granulating application. The granulator has 2 bed knives as standard, a third bed knife can be installed as an option to granulate purgings and thick walled parts.

Advantages & Features

	Reliable, efficient Robust design
	An open, alternating slant cut rotor is standard.
	Bearings are outboard and no grease can enter the grinding chamber.
	Rotor knives are adjusted outside the machine.
	Knife gap setting inside the machine is no longer necessary. Bed knives are placed against setting blocks and again, no gap adjustment is necessary.
	The 180°-screen is symmetrical and can be used from both sides. The standard hole size of the screen is 10 mm ( 3/8"). Other screen sizes are available.
	The clean cut granules produced are ideal for feeding injection molding machines, extruders or pulverizing systems.

Applications

Recycling of all types of injection molded, blow molded and extruded parts. Plastic parts with thin or thick walls can be granulated, as well as purgings, lumps, profile and pipe waste etc.

Plastics Materials
- Injection molding waste
- Blow molding waste
- Extrusion waste

Technical Specifications

Type	PS-V	35-50	40-60	56-70	56-100	80-120
Infeed opening	mm	400x500	650x630	700x700	700x1000	1000x1200
Cutting Chamber	mm	350x500	600x630	650x700	650x1000	940x1200
Rotor diameter	mm	350	400	560	560	800
Cutting Width	mm	500	600	700	1000	1200
Motor	kW	22	55	75	110	160
Capacity*	Kg/h	200-450	350-700	500-1200	650-1700	1200-2500

* Throughput Rate varies depending of the feed material

PS Series 300

PS Series 400

PS Series 600

PS Series 800-1200

PS Series B

PS Series C

PS Series F

PS Series H

PS Series I

PS Series K

PS Series L

PS Series P

PS Series R

PS Series S

PS Series T

PS Series U

PS Series V

PS Series W

Series PSRH

Series PSC

Knife Mill, Type PS-V

Recycling of all types of injection molded, blow molded and extruded parts. Plastic parts with thin or thick walls can be granulated, as well as purgings, lumps, profile and pipe waste etc.

Method of Operation

Advantages & Features

Applications

Technical Specifications

© 2009 PALLMANN Industries, Inc.

PALLMANN Industries, Inc.

36 Atlantic Way, Clifton, New Jersey 07012 - USA

Phone: (973) 471-1450 - Fax: (973) 471-7152

Email: info@PallmannIndustries.com