


	PS Series 300 PS Series 400 PS Series 600 PS Series 800-1200 PS Series B PS Series C PS Series F PS Series H PS Series I PS Series K PS Series L PS Series P PS Series R PS Series S PS Series T PS Series U PS Series V PS Series W Series PSRH Series PSC

Knife Mill, Type PS-T

Granulation of skeletons from thermoforming lines and film waste from rolls of all types of plastic materials such as Polypropylen, Polystyrene, Polyethylene, PVC, Polyester etc.

Method of Operation

Installation of the granulator is on the production floor or in a pit. Feeding is done by smooth infeed rollers. Material is size reduced between rotor- and bed knives. A screen holds material inside the grinding chamber, as long as it is too coarse. Fine material gets discharged through the screen into a pneumatic discharge system.

Advantages & Features

	Reliable, efficient Robust design
	An open, alternating slant cut rotor is standard.
	Bearings are outboard and no grease can enter the grinding chamber.
	Rotor knives are adjusted outside the machine.
	Knife gap setting inside the machine is no longer necessary. Bed knives are placed against setting blocks and again, no gap adjustment is necessary.
	The 180°-screen is symmetrical and can be used from both sides. The standard hole size of the screen is 10 mm ( 3/8"). Other screen sizes are available.
	The clean cut granules produced are ideal for feeding injection molding machines, extruders or pulverizing systems.

Applications

Granulation of skeletons from thermoforming lines and film waste from rolls of all types of plastic materials such as Polypropylene, Polystyrene, Polyethylene, PVC, Polyester etc.

This heavy duty granulator can also be used for cutting any other cuttable organic or inorganic material.

Plastics Materials
- Thermoforming waste
- Film Waste
Organic & Inorganic Materials

Technical Specifications

Type	PS-T	400X700	500X900	500X1400
Scale-Up Factor		1.0	1.2	2.0
Infeed width	mm	630	850	1300
Infeed Opening	mm	408x680	508x880	610x1350
Rotor diameter	mm	400	500	500
Cutting Width	mm	700	900	1400
Motor	kW	45	55	90
Motor Infeed rollers	kW	2.2	3.0	3.0
Capacity*	Kg/h	500-900	650-1100	1000-1800

* Throughput Rate varies depending of the feed material

PS Series 300

PS Series 400

PS Series 600

PS Series 800-1200

PS Series B

PS Series C

PS Series F

PS Series H

PS Series I

PS Series K

PS Series L

PS Series P

PS Series R

PS Series S

PS Series T

PS Series U

PS Series V

PS Series W

Series PSRH

Series PSC

Knife Mill, Type PS-T

Granulation of skeletons from thermoforming lines and film waste from rolls of all types of plastic materials such as Polypropylen, Polystyrene, Polyethylene, PVC, Polyester etc.

Method of Operation

Advantages & Features

Applications

Technical Specifications

© 2009 PALLMANN Industries, Inc.

PALLMANN Industries, Inc.

36 Atlantic Way, Clifton, New Jersey 07012 - USA

Phone: (973) 471-1450 - Fax: (973) 471-7152

Email: info@PallmannIndustries.com