Products

Crushers & Shredders

Granulators

PS Series 300
PS Series 400
PS Series 600
PS Series 800-1200
PS Series B
PS Series C
PS Series F
PS Series H
PS Series I
PS Series K
PS Series L
PS Series P
PS Series R
PS Series S
PS Series T
PS Series U
PS Series V
PS Series W
Series PSRH
Series PSC

Pulverizers

Agglomerators

Laboratory Mills

Ultra-Fine Grinding

 

Solutions by

Industry

Chemical

Food

Pharmaceutical

Plastics & Rubber

Mineral

Recycling

Wood

WPC

 

Profile Shredder, Type PSP

Granulation of extrusion waste

Method of Operation

The Profile Shredder features a horizontal infeed chute and a positive infeed. The machine is designed to keep up with the feed rate of one person. Feeding rejects as long as 6000 mm ( 20) now is as easy as feeding cut-offs from the trim saw.

 

Sheet Granulator, Type PS-P

Granulation of Sheet waste

Method of Operation

The sheet granulator gets installed in a covered pit for easier feeding of the sheet waste as well as for sound protection. The pit should have an air circulation for cooling and stairs for better access to the machines installed in the pit.

Sheet waste is fed by hand thru the inclined feed chute. Material gets crushed and granulated by the knives of a high inertia rotor working against bed knives installed in the granulator housing.  The material gets discharged thru a screen. The mesh size of the screen determines the maximum size of the granules produced. A pneumatic conveying system transports the material to a cyclone separator where it can be collected in a super bag.

Advantages & Features

bullet

Reliable, efficient Robust design

bullet

An open, alternating slant cut rotor is standard.

bullet

Bearings are outboard and no grease can enter the grinding chamber.

bullet

Rotor knives are adjusted outside the machine.

bullet

Knife gap setting inside the machine is no longer necessary. Bed knives are placed against setting blocks and again, no gap adjustment is necessary.

bullet

The 180-screen is symmetrical and can be used from both sides. The standard hole size of the screen is 8 mm ( 5/16").

bullet

The clean cut granules are ideal for feeding a twin screw extruder or a pulverizing system.

Advantages & Features

bullet

Inclined feed chute, low infeed height, operators first choice  

bullet

Positive infeed of material as long as 3000 mm (10)

bullet

No knife adjustments inside the machine necessary

bullet

Alternating slant cut rotor ensures maximum capacity

bullet

Symmetrical screen with maximum possible screen area

bullet

Good access to the cutting chamber for easy cleaning

bullet

Safety switches for maximum operator protection

bullet

Steel fabricated design, rugged and reliable

bullet

Compact space saving design

Applications

Reject material from extrusion of profiles, sidings, channel and tubes can be granulated efficiently with the Profile Shredder Type PSP. By granulating waste in-house right after quality inspection, valuable raw material can be recycled back to the extrusion lines thus increasing the profit margins.

  • Plastics Materials

    • Extrusion profiles

    • Sidings

    • Channel and tubes

Applications

The sheet granulator type PS-P is designed to granulate sheet waste from rigid PVC, ABS, PE. Sheets can have a length of up to 3000 mm, with a maximum height of the sheet of 150 mm and a maximum thickness of the sheet of 50 mm. Granulators for different sheet width are available.

  • Plastic Sheet Waste

    • PVC

    • ABS

    • PE

Technical Specifications

Type

PSP 300X500 400X500 400X700

500X700

600X900

Scale-Up Factor   0.7 1.0 1.2 1.5 1.8
Infeed opening mm 420X80 420X130 620X130 620X165 800X240

Rotor diameter

mm 300 400 400

500

600

Rotor type

  WS 6 WS 8 WS 8

WS 8

WS 10

Motor

kW 37 45 55

75

110

Capacity* Kg/h 400-800 600-1500 700-1600 1200-2500 1500-2800

* Throughput Rate varies depending of the feed material

 

Type

PS-P 4-5 4-7.5 4-10

4-12.5

Scale-Up Factor   1.0 1.4 1.9 2.3
Infeed opening mm 400X500 400X750 400X1000 400X1250

Rotor diameter

mm 400 400 400

400

Cutting width

mm 500 500 500

500

Motor

kW 22-45 37-55 45-75

55-90

Capacity* Kg/h 400-800 600-1200 800-1500 1000-1900

* Throughput Rate varies depending of the feed material

Home | About PALLMANN | Products | Solutions by Industry | Parts and Service | Contact Us | Sitemap


Quick Search:

2009 PALLMANN Industries, Inc.
PALLMANN Industries, Inc.
36 Atlantic Way, Clifton, New Jersey 07012 - USA
Phone: (973) 471-1450 - Fax: (973) 471-7152
Email: info@PallmannIndustries.com