


	PS Series 300 PS Series 400 PS Series 600 PS Series 800-1200 PS Series B PS Series C PS Series F PS Series H PS Series I PS Series K PS Series L PS Series P PS Series R PS Series S PS Series T PS Series U PS Series V PS Series W Series PSRH Series PSC

Knife Mill, Type PS-F

Size reduction of film waste of any kind

Method of Operation

Granulators Type PS-F are used in-line or at central locations to cut film waste of all kind. They are equipped with an infeed roller system for feeding film scrap from the production line during start up. Loose film scrap can be fed by hand or with a conveyor belt.

Installation of the granulator is on the production floor or in a pit. Film waste is fed with infeed rollers, by hand or with a belt conveyor. Material is size reduced between rotor- and bed knives. A screen holds material inside the grinding chamber, as long as it is too coarse. Fine material gets discharged through the screen into a pneumatic discharge system.

Advantages & Features

	Reliable, efficient Robust design
	An open, alternating slant cut rotor is standard.
	Bearings are outboard and no grease can enter the grinding chamber.
	Rotor knives are adjusted outside the machine. Knife gap setting inside the machine is no longer necessary. Bed knives are placed against setting blocks and again, no gap adjustment is necessary.
	The 180°-screen is symmetrical and can be used from both sides.
	The standard hole size of the screen is 6 mm ( 1/4"). Other screen sizes are available.
	The material produced has a high bulk density and is ideal for feeding a film extruder.

Applications

Plastics Materials
- PET
- A-PET
- G-PET
- PA
- PP
- BOPP
- PA
- PVC

Technical Specifications

Type		PSF 200x150	PSF 200x450	PS-F 3	PS-F 3.5
Cutting Chamber	mm	100x150	100x450	260x250	300x450
Rotor diameter	mm	200	200	230	320
Rotor Type		GS2	GS2	S3	GS3
Motor	kW	2.2	4.0	5.5-7.5	11-22
Capacity*	Kg/h	100-1000	250-3000	40-180	80-380

Type		PS-F 4-5	PS-F 4-7.5	PS-F 4-10	PS-F 4-12.5
Cutting Chamber	mm	350X500	350X750	350X1000	350X1200
Rotor diameter	mm	400	400	400	400
Rotor Type		GS3	GS3	F5	F5
Motor	kW	18.5-45	22-55	75-100	110-200
Capacity*	Kg/h	150-660	220-990	320-1480	400-1850

Type		PS-F 6-9	PS-F 8-12	PS-F 8-15	PS-F 8-18
Cutting Chamber	mm	550X900	750X1200	750X1500	750X1800
Rotor diameter	mm	600	800	800	800
Rotor Type		FW6	FW8	FW12	FW12
Motor	kW	75-110	110-200	135-250	160-250
Capacity*	Kg/h	400-1780	700-3000	40-180	80-380

* Throughput Rate varies depending of the feed material

PS Series 300

PS Series 400

PS Series 600

PS Series 800-1200

PS Series B

PS Series C

PS Series F

PS Series H

PS Series I

PS Series K

PS Series L

PS Series P

PS Series R

PS Series S

PS Series T

PS Series U

PS Series V

PS Series W

Series PSRH

Series PSC

Knife Mill, Type PS-F

Size reduction of film waste of any kind

Method of Operation

Advantages & Features

Applications

Technical Specifications

© 2009 PALLMANN Industries, Inc.

PALLMANN Industries, Inc.

36 Atlantic Way, Clifton, New Jersey 07012 - USA

Phone: (973) 471-1450 - Fax: (973) 471-7152

Email: info@PallmannIndustries.com