|
|
 |
 |
|
|
|
|
|
 |
|
|
|
Chippers, type PHK
Cutting
of all types of plastic materials, as well as cuttable
organic and inorganic materials
Method of Operation
Installation
of the chipper is on the production floor or on
top of a pit. Feeding is done with a belt
conveyor. In-feed rollers grab the material and
move it towards the rotor of the chipper.
Material is size reduced between rotor and bed
knives. A screen holds material inside the
cutting chamber, as long as it is too coarse.
Fine material gets discharged through the screen
into a pneumatic discharge system. Bottom
discharge onto a mechanical conveyor or into a
bin is available. |
 |
|
 |
Advantages & Features
 |
Defined
granule size depending on the chosen
size of the screen, therefore no
overs in the end product |
|
|
Load-controlled material feeding via
conveyor belt and draw-in rollers |
|
|
Easy,
horizontal feeding or optional
feeding from the top |
|
|
Rugged
and reliable construction, designed
for operation in harsh environments |
|
|
Easy
screen- and knife exchange due to
maintenance-friendly construction |
|
|
No knife
setting necessary in the machine |
|
|
High
economic efficiency and throughput
rate |
|
Applications
|
Technical Specifications
|
Type |
PHK |
120 x 700 |
180 x 1050 |
200 x 1400 |
300 x 1050 |
|
Infeed
opening |
mm |
120 x
700 |
180 x 1050 |
200 x 1400 |
300 x 1050 |
|
Rotor
diameter |
mm |
400 |
600 |
600 |
800 |
|
Motor,
main drive |
kW |
45 |
75-110 |
75-110 |
110-160 |
|
Motor,
draw-in rollers |
kW |
2 x 1.5 |
2 x 5.5 |
2 x 5.5 |
2 x 5.5 |
|
Throughput rate * |
kg/h |
500
- 1200 |
1000 - 6000 |
1000 - 6000 |
1000 - 9000 |
* Throughput Rate
based on screen size of 10 x 10 mm and may vary
depending of the feed material |
|
|
|
|
 |
|
|
|
 |
|
