|
|
 |
 |
|
|
|
|
|
 |
|
|
|
Granulation of Carpet
& Floor Covering Products with the
Plastics Chipper, Type PHK
Size Reduction of Edge Trimmings, Tiles, Sheets,
or Skeletons from Production Waste
Waste is generated during
the production of floor coverings or carpet such as edge
trims, tiles, sheets and skeletons. The ORIGINAL
PALLMANN Plastics Chipper, type PHK is the optimum
solution for the production of granules of defined
sizes. These granules are an outstanding starting
product for downstream processing steps such as
densifying equipment like the Plast Agglomerator System,
type PFV.
Method
of Operation
The Carpet or Floor Covering
waste is fed onto a horizontal conveyor belt. Feeding to
the cutting rotor is performed via load-controlled
draw-in rollers. The material is cut between the rotor-
and the housing knives and then discharged out of the
machine housing through a screen. The hole size of the
screen insert is to be determined depending on further
processing.
The finished granules are
pneumatically conveyed and can be intermediately stored
in big-bags or in a bin for later processing.
|
 |
|
|
1.
Conveyor Belt
2.
Chipper |
3.
Fan
4.
Cyclone |
5.
Material collecting bin
6.
Control Cabinet |
|
Advantages & Features
 |
Defined granule size
depending on the chosen size of the screen,
therefore no overs in the end product |
|
|
Load-controlled
material feeding via conveyor belt and draw-in
rollers |
|
|
Easy, horizontal
feeding or optional feeding from the top |
|
|
Rugged and reliable
construction, designed for operation in harsh
environments |
|
|
Easy screen- and
knife exchange due to maintenance-friendly
construction |
|
|
No knife setting
necessary in the machine |
|
|
High economic
efficiency and throughput rate |
|
Technical Specifications
|
Type |
PHK |
120 x 700 |
180 x 1050 |
200 x 1400 |
300 x 1050 |
|
Infeed
opening |
mm x mm |
120 x 700 |
180 x 1050 |
200 x 1400 |
300 x 1050 |
|
Rotor
diameter |
mm |
400 |
600 |
600 |
800 |
|
Motor, main
drive |
kW |
45 |
75-110 |
75-110 |
110-160 |
|
Motor,
draw-in rollers |
kW |
2 x 1.5 |
2 x 5.5 |
2 x 5.5 |
2 x 5.5 |
|
Throughput
rate * |
kg/h |
800 - 1200 |
1000 - 6000 |
1000 - 6000 |
1000 - 9000 |
* Throughput Rate based
on screen size of 10 x 10 mm and may vary depending
of the feed material
|
|
|
|
|
 |
|
|
|
 |
|
